Recognised surveyors

P3 – Periodic 3 – Steel and Aluminium

P5 – Periodic 5 – Plastic – Roto moulded only

Surveyor - Electrical Systems - Inspection and testing of electrical systems on board ships

IC2 – Initial construction 2 - Steel and Aluminium

P1 – Periodic 1 – Steel and Aluminium for up to 60 metres Inshore only

P1r – Periodic 1r – Steel and Aluminium

P2 – Glass Reinforced Plastic (GRP) and Wood for fishing vessels up to 24 metre

P3 – Periodic 3 – Wood and Glass Reinforced Plastic (GRP)

P5 – Plastic 5 – Roto moulded only

Novel Craft – Personal Water Craft

DA_E – Design Approval Electrical - Specialist design approval for ship systems

Surveyor – Electrical Systems - Inspection and testing of electrical systems on board ship

IC1 – Initial Constuction 1 - All materials - Ships up to 45 metres, restricted to Offshore Limits (where loadline rules do not apply)

P1r – Periodic 1r - all materials for ships up to 45 metres, restricted to Offshore Limits (where loadline rules do not apply)

Surveyor – MARPOL Annex VI (Part 199), ships less than 400GT and engaged in international or domestic voyage

P2 – Periodic 2 – Wood, FRP, Steel and Aluminium

I2 – Initial 2 – Wood, FRP, Steel and Aluminium (Not Construction). Restricted to vessels ≤ 24 metres and within Coastal limits

IC1 – Initial and Construction 1 – Steel and Aluminium

P1 – Periodic 1 – Steel and Aluminium

P3 – Periodic 3 – GRP

Surveyor – MARPOL/IOPP and Ballast Water Management (Part 300) – limited to survey only

Surveyor – Maritime Labour Convention

Surveyor – UNSP barges at or over 400 GT and engaged in international or domestic voyage / MARPOL Annex VI (Part 199)

Surveyor – MARPOL Annex VI (Part 199), ships at or over 400 GT and engaged in domestic voyage

IC3 - Initial Construction 3 - Steel and Aluminium

P2 - Periodic 2 - Steel and Aluminium

DA_SA – Design approval – Steel and Aluminium for ships up to 35 metres within Offshore Limits

DA_F – Design approval - Fibre Reinforced Plastic (FRP) for ships up to 35 metres within Offshore Limits

DA_P – Design approval – Plastic – only for ships up to 35 metres within Offshore Limits

DAE – Design Approval – Electrical Systems , ships up to 35 m in length (limited to extra low voltage electrical plans and/or low voltage electrical plans)

I2SA – Steel and Aluminium ships up to 35 metres, restricted to Offshore Limits only, Initial survey only (not construction), subject to following limitations: Not permitted to undertake any Loadline surveys (MR Part 47) Passenger boats (less than 24m in length) Non-Passenger boats (less than 24 meters in length), that are not surveyed to carry any cargo.

P1rSA - Steel and Aluminium ships up to 35 metres, restricted to Offshore Limits only, subject to the following limitations Not permitted to undertake any Loadline surveys (MR Part 47) Passenger boats (less than 24m in length) Non-Passenger boats (less than 24 meters in length), that are not surveyed to carry any cargo.

Surveyor – Electrical Systems, ships up to 35m length (limited to extra low voltage and/or low voltage)

DA_W – Design approval – Electrical - Electrical Systems

Surveyor – Electrical Systems

IC2 – Initial and Construction 2 – Steel, Aluminium, Wood and FRP

P2 – Periodic 2 – Steel, Aluminium, Wood and FRP

IC3 – Initial Construction – Ferro Cement

P3 – Periodic 3 – Ferro-Cement

DAE – Design approval – Electrical – Specialist design approval for ships electrical systems

Surveyor – Electrical Systems – Inspection and testing of electrical systems on board ships

Survey Recognitions:
IC1 – Initial Construction 1 – Steel, Aluminium, FRP, Wood, and Plastic for ships of 35m or less, operating up to Offshore Limits

P1r – Periodic 1r – Steel, Aluminium, FRP, Wood, and Plastic for ships of 35m or less, operating up to Offshore Limits

DA_SA– Design approval – Steel and Aluminium for ships of 35m or less, operating up to Offshore Limits

DA_F– FRP for ships of 35m or less, operating up to Offshore Limits

DA_P – Design approval – Plastic for ships of 35m or less, operating up to Offshore Limits

P3 – Periodic 3 – FRP and GRP

IC1 – Initial and construction 1 – Steel, Aluminium, Wood & GRP only

P1 – Periodic 1 – Steel, Aluminium, Wood & GRP only

Surveyor – under Maritime Rule Part 40G for Reconfigurable barges only

P1r – Periodic 1r – Steel and Aluminium

P2 – Periodic 2 – Steel and Aluminium

Maritime Labour Convention (MLC)

P2 – Periodic 2 – Steel and Aluminium, GRP and Wood up to 24 metres only

IC3 – In construction surveys – Aluminium – limited to Senator vessels

IC3 – Initial surveys – Aluminium

P3 – Periodic 3 – Steel and Aluminium, GRP and Wood

P2* – Periodic 2 – Steel and Aluminium, GRP and Wood (*up to 24 metres only)

DA_E – Design Approval – Electrical– Electrical Systems

Surveyor – Electrical Systems

P1r Periodic 1r – All materials for ships of 35 metres or less within Offshore Limits

IC1 Initial Construction 1 – All materials for ships of 35 metres or less within Offshore Limits

Surveyor – Radio Equipment

P4 – Periodic 4 – Glass Reinforced Plastic (GRP), Fibre Reinforced Plastic (FRP) and Alloy

DA_E – Design approval - Electrical - Specialist design approval for ships electrical systems

Surveyor – Electrical Systems - Inspection and testing of electrical systems on board ships

P1 - Periodic 1 - Steel Aluminium

Surveyor – MARPOL Annex VI (Part 199), ships less than 400 GT and engaged in international or domestic travel

P2 – Periodic 2 – Steel

IC2 – Initial Construction 2 – Steel

Limited to: open boats, fishing vessels, and vessels that do not carry cargo

IC1 - Initial Construction 1 (restricted level) – Steel, Aluminium, FRP and Wood – limited to vessels less than 35m, Offshore limits

P1 - Periodic 1 (restricted level) – Steel, Aluminium, FRP and Wood – limited to vessels less than 35m, Offshore limits

Survey Recognitions:
IC1 – Initial Construction 1 – for ships up to 35 metres, restricted to Offshore Limits only

P1r – Periodic 1r – for ships up to 35 metres, restricted to Offshore Limits only

DA_SA – Design approval – Steel and Aluminium for ships up to 45 metres restricted to Offshore Limits

DA_F – Design approval - Fibre Reinforced Plastic (FRP) for ships up to 45 metres restricted to Offshore Limits

DA_P – Design approval – Plastic for ships up to 45 metres restricted to Offshore Limits

IC2 – Initial and construction 2 – Aluminium

IC2 - Initial and construction 2 – Steel: Major Alteration / Repair only

IC2 - Initial and construction 2 – Glass Reinforced Plastic (GRP): Initial Survey only

P1r – Periodic 1r – Steel and Aluminium

P2 – Periodic 2 – Wood and GRP

Surveyor – Novel craft – Canoe

P1 – Periodic 1 – Periodic Surveys: Steel and Aluminium

Surveyor – MARLPOL/IOPP

Surveyor – Electrical Systems

IC1 – Initial and Construction 1 – Steel and Aluminium

P1 – Periodic 1 – Steel and Aluminium

Maritime Labour Convention (MLC)

P1 – Periodic 1 – Steel and Aluminium

Maritime Labour Convention (MLC)

P1r – Periodic 1r – Steel and Aluminium

P2 – Periodic 2 - FRP(GRP and Carbon Fibre)

IC2 – Initial Construction 2 – Steel and Aluminium, Initial 2 only (not construction) – FRP (GRP and Carbon Fibre)

DAE – Design Approval –Electrical Systems

IC1SA Initial and Construction 1 - Steel and Aluminium ships up to 35 metres (restricted to Offshore Limits only) - subject to following conditions:
- Not permitted to undertake any Loadline surveys (MR Part 47)
- Passenger boats (less than 24m in length) - Non-Passenger boats (less than 24 meters in length), that are not surveyed to carry any cargo.

P1rSA Periodic 1 - Steel and Aluminium ships up to 35 metres (restricted to Offshore Limits only).

Surveyor – Electrical Systems

Surveyor – Radio equipment

Surveyor – under Maritime Rule Part 40G for Jet Sprint Vessels and Personal Water Craft only

Surveyor – Carriage of Livestock

IC1 – Initial and Construction 1 (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

P1r – Periodic 1r (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

Surveyor- Electrical (Restricted level) – only up to 50V (AC); and 120V (DC)

IC1 – Initial Construction 1 – for ships up to 35 metres, restricted to Offshore Limits only

P1r – Periodic 1r – for ships up to 35 metres, restricted to Offshore Limits only

DA_SA – Design approval – Steel and Aluminium for ships up to 45 restricted to Offshore Limits

DA_F – Design approval - Fibre Reinforced Plastic (FRP) for ships up to 45 metres restricted to Offshore Limits

DA_P - Design approval – Plastic for ships up to 45 metres restricted to Offshore Limits

DA_W - Design approval – Wood for ships up to 45 metres restricted to Offshore Limits

DA_LC - Design approval – Light Craft for ships up to 45 metres restricted to Offshore Limits

DA_N - Design approval – Novel Craft for ships up to 45 metres restricted to Offshore Limits

IC1 – Initial and Construction 1 (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

P1_r – Periodic 1r (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

Surveyor – Electrical (Restricted level) – only up to 50V (AC); and 120V (DC)

DA_SA – Design approval (Restricted level) – Steel and Aluminium only for ships up to 35 metres within Offshore Limits

DA_F – Design approval (Restricted level) – Fibre Reinforced Plastic (FRP) only for ships up to 35 metres within Offshore Limits

DA_P - Design approval (Restricted level) – Plastic – only for ships up to 35 metres within Offshore Limits

P1 – Periodic 1 – Steel and Aluminium

IC1 – Initial Construction – Steel and Aluminium

Surveyor – MARPOL/IOPP

IC1 – Initial and Construction 1 (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

Surveyor – Electrical (Restricted level) – only up to 50V (AC); and 120V (DC)

DAsa - design approval - Steel and Aluminum for ships up to 45 meteres, restricted to offshore limits only

DAf - Design approval - Fibre Reinforced Plastic (FRP) for ships up to 45 meters restricted to offshore limits only.

Dap - design approval - plastic for ships up to 45 metres restricted to offshore limits only

Daw - design approval - plastic for ships up to 45 metres restricted to offshore limits only

DAlc - design approval - plastic for ships up to 45 metres restricted to offshore limits only

Dan - design approval - plastic for ships up to 45 metres restricted to offshore limits only

DA_SA – Design approval – Steel and Aluminium

DA_F – Design approval – FRP

DAw – Design approval – Timber composites only

DA_P – Design approval – Plastic

DA_N – Design approval – Seabreacher vessels

DA_N – Design approval – Novel Craft (Tunnel-hull racing boats only)

Surveyor – Novel craft – Seabreacher vessels

Surveyor – Novel craft – (Tunnel-hull racing boats only)

40G Marine Autonomous Surface Ships (MASS)

P1 - Periodic 1 - Steel and Aluminium

P2 – Periodic 2 – Wood and Glass Reinforced Plastic (GRP)

IC1 - Initial and Construction - Steel and Aluminium

I2 - Initial 2 - FRP (not construction, limited to initial surveys only)

P2 - Periodic 2 - Steel Aluminium

Surveyor - MARPOL Annex VI (Part 199), ships less than 400 GT and engaged in international or domestic travel

IC3 – Initial and Construction 3 – Wood and Fibre Reinforced Plastic (FRP)

P3 – Periodic 3 – Wood and Fibre Reinforced Plastic (FRP)

IC2 – Initial and Construction 2 – Steel and Aluminium

P1r – Periodic 1r – Steel and Aluminium

Surveyor – Carriage of Livestock

IC1 – Initial and Construction 1 (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

P1 – Periodic 1 (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

IC1 – Initial Construction 1 (up to 24 metres) - Steel and Aluminium,FRP (Composite - Carbon Fibre, Kevlar/Aramid) GRP and Wood

P1 – Periodic 1r (up to 24 metres) – Steel and Aluminium,FRP (Composite – Carbon Fibre, Kevlar/Aramid), GRP and Wood

IC2 – Initial Construction 2 – Steel and Aluminium,FRP (Composite and GRP), and Wood

P2 – Periodic 2 – Steel and Aluminium,FRP (Composite and GRP), and Wood

Surveyor – Novel Craft – Seabreacher vessels

Surveyor – Novel Craft – Flite board electric foil board

Surveyor – Novel Craft – Personal Water Craft (PWC), Classic power and Sailing vessels

P3 – Periodic 3 – Steel and Aluminium

P2 – Periodic 2 (with conditions) – Open Boats, Passenger Boats (less than 24 metres in length), Non-passenger boats (less than 24 metres in length) that are not surveyed to carry cargo. Not permitted to undertake any load line surveys

IC1 – Initial and Construction 1 – Steel and Aluminium

IC1 – Initial (survey only ≤ 24 metres) – Wood and GRP

IC2 – Initial and construction 2 – Wood and GRP

P1 – Periodic 1 – Steel, Aluminium, Wood and GRP

IC2 – Initial and Construction 2 – Aluminium

IC3 Initial Construction 3 - Rotor Moulded (up to 6m)

Surveyor Novel Craft - Rotor Moulded (up to 6m)

P3 – Periodic 3 – Wood and GRP

P1r – Periodic 1 (Restricted level) – Steel and Aluminium

IC1 – Initial and Construction 1 – Steel and Aluminium, FRP (Composite and GRP), Wood & Plastic (Roto moulded and welded)

P1r – Periodic 1r – Steel and Aluminium, FRP (Composite and GRP), Wood & Plastic (Roto moulded and welded)

Surveyor – Novel craft – Amphibious craft, Waka, Classic Power and Sailing, and Reconfigurable barges

Surveyor – 40F Light Craft (Hovercraft)

P3 – Periodic 3 – Steel and Aluminium

IC1 – Initial and Construction 1 – Steel, Aluminium, Composite and GRP

P1 – Periodic 1 – Steel, Aluminium, Composite and GRP

Surveyor – MARPOL/IOPP, High Speed Craft, Electrical Systems, Carriage of Livestock and BWM (Part 300)

DA_SA – Design approval – Steel and Aluminium (including Alloys) for ships up to 45 metres within Offshore Limits

DA_F – Design approval - Fibre Reinforced Plastic (FRP) for ships up to 45 metres within Offshore Limits

DA_P – Design approval – Plastic – only for ships up to 45 metres within Offshore Limits

DA_W – Design approval (Restricted level) – Wood – for ships up to 45 metres within Offshore Limits

DA_LC – Design approval – Light Craft – for ships up to 45 metres within Offshore Limits

DA_N – Design approval – Novel Craft – for ships up to 45 metres within Offshore Limits

DA_FC – Ferro Cement

DA_E – Design approval - Electrical – Limited only up to 50V (AC) and 120V (DC)

IC1 - Initial and Construction 1 (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

P1r - Periodic 1 (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

Surveyor – Novel Craft – Personal Water Craft (PWC) and Flyboards

IC1 – Initial Construction 1 – Steel, Aluminium

P3 – Periodic 3 – GRP

P1r - Periodic 1r - Steel, Aluminium

Surveyor – MARPOL Annex VI (Part 199), ships less than 400GT and engaged in international or domestic voyage

IC1 – Initial Construction 1 – Steel, Aluminium, FRP, and Wood for ships of 35m or less

P1 – Periodic 1 – Steel, Aluminium, FRP, and Wood for ships of 35m or less

P2 – Steel and Aluminium

IC1 – Initial and Construction 1 – Steel and Aluminium, GRP and Wood

P1 – Periodic 1 – Steel and Aluminium, GRP and Wood

Surveyor – Novel craft – Personal Water Craft (PWC)

IC1 – In Construction and Initial 1 - all materials only for ships up to 35 metres within the Offshore Limits

P1r – Periodic 1 (reswtricted) all materials only for ships up to 35 metres within the Offshore Limits, Surveyor - radio equirpment

P3 - Periodic 3 - Steel and Aluminium

Surveyor – MARPOL Annex VI (Part 199), ships less than 400GT and engaged in international or domestic voyage

Limited to: open boats, fishing vessels, and vessels that do not carry cargo:

DASA Design Approval – Steel and Aluminium – limited to vessels less than 24m, Offshore limits (not permitted to undertake calculations of assignment for load line surveys)

DAF Design Approval – FRP – limited to vessels less than 24m, Offshore limits (not permitted to undertake calculations of assignment for load line surveys)

IC1 Initial Construction 1 – Steel, Aluminium, and FRP – limited to vessels less than 24m, Offshore limits (not permitted to undertake load line surveys)

P1 Periodic 1 – Steel, Aluminium, and FRP – limited to vessels less than 24m, Offshore limits (not permitted to undertake load line surveys)

DA Design Approval – Steel & Aluminium, Wood, Plastic, Light Craft, and Novel Craft for ships up to 45 metres, within Offshore Limits

IC1 Initial Construction 1 – Steel, Aluminium, Wood, and FRP for ships up to 35 metres, within Offshore Limits

P1 Periodic 1 – Steel, Aluminium, Wood, and FRP for ships up to 35 metres, within Offshore Limits

DAE – Design Approval - Electrical – Specialist design approval for ships electrical systems

Surveyor - Electrical Systems - Inspection and testing of electrical systems on board ships