Recognised surveyors

Below is a list of surveyors recognised by Maritime New Zealand and definitions of survey recognition.

On this page:

Engaging a surveyor

Under MOSS, maritime operators can now engage a surveyor directly. Your vessel survey can be done by any surveyor, so long as they have been recognised (approved) by Maritime NZ to carry out survey work.

Operators should contact a recognised surveyor (listed below) and check that they hold the appropriate recognition for the type of vessel to be surveyed.

Before starting the survey, the surveyor should adjust the template provided by Maritime NZ, to reflect your vessel’s requirements and characteristics. They only need to use the parts of the template that relate to your vessel.

Maritime NZ does not set the fees charged by surveyors. You can manage your survey costs by comparing surveyors’ charges before you engage them. You can also share the costs of travel time with other operators in your area by having your vessels surveyed at the same time.

Contact a surveyor

List of recognised surveyors:

Adam Brancher

KEDGE Pty Ltd

Survey Recognitions:

IC2 – Initial construction 2 (Restricted level) – All materials only for ships up to 35 metres

P1r – Periodic 1 (Restricted level) – All materials only for ships up to 35 metres within Offshore Limits

Survey area:
Australia, New Zealand, Overseas

Phone:
+61 3 6292 5782

Mobile:
+61 417 544 339

Email:
adambrancher@kedge.com.au

Web:
www.kedge.com.au

Aidan Bird

Emtech Limited

Survey Recognitions:

P3 – Periodic 3 – Steel and Aluminium

P5 – Periodic 5 – Plastic – Roto moulded only

Survey area:
New Zealand (based in Otago)

Phone:
+64 3 477 2836

Mobile:
+64 27 489 2473

Email:
aidan@emtech.co.nz

Web:
www.emtech.co.nz

Alan Jamieson

eMarine Ltd

Survey Recognitions:
DAEDesign approval - Electrical - Specialist design approval for ships electrical systems

Surveyor - Electrical Systems - Inspection and testing of electrical systems on board ships

Survey area:
New Zealand (based in Nelson)

Mobile:
+64 27 442 7357

Email:
aj@emarine.nz

Alistair Coleman

Survey Bay of Plenty Limited

Survey Recognitions:

IC2 – Initial construction 2 - Steel and Aluminium

P1 – Periodic 1 – Steel and Aluminium for up to 60 metres Inshore only

P1r – Periodic 1r – Steel and Aluminium

P2 – Glass Reinforced Plastic (GRP) and Wood for fishing vessels up to 24 metre

P3 – Periodic 3 – Wood and Glass Reinforced Plastic (GRP)

P5 – Plastic 5 – Roto moulded only

Novel Craft – Personal Water Craft

Survey area:
North Island

Phone:
+64 7 574 7458

Mobile:
+64 27 449 0921

Email:
surveybop@xtra.co.nz

Andrew Candler

Able Ships Limited

Survey Recognitions:

IC1 – Initial 1 only (not construction) – Steel, Aluminium, Wood & GRP

IC2 - Initial and construction 2 – Steel, Aluminium, Wood & GRP only

P1r - Periodic 1r – Steel, Aluminium, Wood & GRP only

DAw – Design approval - Wood

Survey area:
New Zealand, based in Nelson/Marlborough

Phone:
+64 3 539 0203

Mobile:
+64 27 458 6041

Email:
andrew@ableships.co.nz

Web:
www.ableships.co.nz

Ben Felton

Survey Maritime Australia

Survey Recognitions:

DAE – Design Approval Electrical - Specialist design approval for ship systems

Surveyor – Electrical Systems - Inspection and testing of electrical systems on board ship

IC1 – Initial Constuction 1 - All materials - Ships up to 45 metres, restricted to Offshore Limits (where loadline rules do not apply)

P1r – Periodic 1r - all materials for ships up to 45 metres, restricted to Offshore Limits (where loadline rules do not apply)

Surveyor – MARPOL Annex VI (Part 199), ships less than 400GT and engaged in international or domestic voyage

Survey area:
New Zealand and Australia

Mobile:
+64 21 1 49 9857

Email:
ben@maritimesurveyaustralia.com.au

Brendan Holt

HOLT Marine Surveying

Survey Recognitions:

P3 – FRP, Wood, Steel and Aluminium

IC3 – FRP, Wood, Steel and Aluminium

Survey area:
Otago, Southland, New Zealand

Mobile:
+64 21 217 8377 or +64 21 186 5227 (admin)

Email:
info@holt.nz

Bruce Maroc

Coram Marine Services

Survey Recognitions:

IC1 – Initial and Construction 1 – Steel and Aluminium

P1 – Periodic 1 – Steel and Aluminium

P3 – Periodic 3 – GRP

Surveyor – MARPOL/IOPP, High Speed Craft and Electrical Systems

MLC, BWM (Part 300)

Survey area:
New Zealand and International

Phone:
+64 9 914 2804

Mobile:
+64 21 0229 5351

Email:
brucemaroc@outlook.com

Web:
www.lr.org

Calwin Ewe

Kedge Pty LTD

Survey Recognitions:

DASA – Design approval – Steel and Aluminium for ships up to 35 metres within Offshore Limits

DAF – Design approval - Fibre Reinforced Plastic (FRP) for ships up to 35 metres within Offshore Limits

DAP – Design approval – Plastic – only for ships up to 35 metres within Offshore Limits

Survey area:
New Zealand and Australia

Phone:
+61 467 069 036 (Australia)

Email:
service@kedge.com.au

Website:
www.kedge.com.au

Carl Jernert

Kedge Pty LTD

Survey Recognitions:

DAE – Design Approval – Electrical Systems , ships up to 35 m in length (limited to extra low voltage electrical plans and/or low voltage electrical plans)

I2SA – Steel and Aluminium ships up to 35 metres, restricted to Offshore Limits only, Initial survey only (not construction), subject to following limitations: Not permitted to undertake any Loadline surveys (MR Part 47) Passenger boats (less than 24m in length) Non-Passenger boats (less than 24 meters in length), that are not surveyed to carry any cargo.

P1rSA - Steel and Aluminium ships up to 35 metres, restricted to Offshore Limits only, subject to the following limitations Not permitted to undertake any Loadline surveys (MR Part 47) Passenger boats (less than 24m in length) Non-Passenger boats (less than 24 meters in length), that are not surveyed to carry any cargo.

Surveyor – Electrical Systems, ships up to 35m length (limited to extra low voltage and/or low voltage)

Survey area:
New Zealand and Australia

Mobile:
+61 437 887 051 (Australia)

Phone:
+61 3 6292 5782 (Australia)

Email:
carljernet@kedge.com.au

Website:
www.kedge.com.au

Christopher Lynch-Blosse

Attest LTD

Survey Recognitions:

DAW – Design approval – Electrical - Electrical Systems

Surveyor – Electrical Systems

Survey area:
Auckland

Phone:
+64 21 666 848

Email:
chris@attest.co.nz

Website:
www.attest.co.nz

Cory Ward

Marinecraft & Fibreglass Limited

Survey Recognitions:

IC2 – Initial and Construction 2 – Steel, Aluminium, Wood and FRP

P2 – Periodic 2 – Steel, Aluminium, Wood and FRP

IC3 – Initial Construction – Ferro Cement

P3 – Periodic 3 – Ferro-Cement

Survey area:
Within New Zealand and based in Southland

Phone:
+64 3 234 8883

Mobile:
+64 27 304 3787

Email:
coryward@xtra.co.nz

Web:
www.marinecraft.co.nz

David (Dave) Potter

Able Ships Limited
Robin Williams and Associates

Survey Recognitions:

DAE – Design approval – Electrical – Specialist design approval for ships electrical systems

Surveyor – Electrical Systems – Inspection and testing of electrical systems on board ships

Survey area:
New Zealand

Mobile:
+64 21 655 738

Email:
dave@toplogic.co.nz

David Nicholls

Coastal Marine Surveys Limited

Survey Recognitions:

P3 – Periodic 3 – FRP and GRP

P1r - Periodic 1r – Steel and Aluminium
Survey area:
Coromandel based, New Zealand and Overseas

Tel:
+64 7 866 7799

Mobile:
+64 21 949 738

Email:
cmsurveysltd@outlook.com

Web:
www.coastalmarinesurveysltd.com

Dominic Harvey

Seasun Limited

Survey Recognitions:

IC1 – Initial and construction 1 – Steel, Aluminium, Wood & GRP only

P1 – Periodic 1 – Steel, Aluminium, Wood & GRP only

Surveyor – under Maritime Rule Part 40G for Reconfigurable barges only

Survey area:
New Zealand

Tel:
+64 3 573 5982

Mobile:
+64 27 577 4746

Email:
DGH@seasunbound.com

Evgeny Ustyuzhanin

Survey Recognitions:

P1r – Periodic 1r – Steel and Aluminium

Survey area:
Northland, Stewart Island, Chatham Island and New Zealand wide

Mobile:
+64 27 511 7661

Email:
evgeny.u@xtra.co.nz

Faruque Hasan

MetaCentre NZ Limited

Survey Recognitions:

P2 – Periodic 2 – Steel and Aluminium

Maritime Labour Convention (MLC)

Survey area:
New Zealand

Mobile:
+64 21 0849 4678

Email:
hasan@metacentre.co.nz

Web:
www.metacentre.co.nz

Gary Levy

Able Ships Limited
75 The Cliffs
Nelson 7010

Survey Recognitions:

P2 – Periodic 2 – Steel and Aluminium, GRP and Wood up to 24 metres only

Survey area:
New Zealand & Chatham Islands

Mobile:
+64 27 539 0399

Email:
g.levy@xtra.co.nz

Web:
www.ableships.co.nz

Gavin Aikman

Able Ships Limited
Coromandel Nautical Surveyors Limited

Survey Recognitions:

IC3 – In construction surveys – Aluminium – limited to Senator vessels

IC3 – Initial surveys – Aluminium

P3 – Periodic 3 – Steel and Aluminium, GRP and Wood

P2* – Periodic 2 – Steel and Aluminium, GRP and Wood (*up to 24 metres only)

Survey area:
North Island, South Island, Chatham Islands & Coromandel area

Tel:
+64 9 535 7702
+64 3 543 2024

Mobile:
+64 21 450 579

Web:
www.ableships.co.nz

Glen Whybro

GN Marine

Survey Recognitions:

P1r Periodic 1r – All materials for ships of 35 metres or less within Offshore Limits

IC1 Initial Construction 1 – All materials for ships of 35 metres or less within Offshore Limits

Surveyor – Radio Equipment

Survey area:
New Zealand and Australia

Mobile:
+61 8 8341 6535

Phone:
+61 427 604 153

Email:
g.whybro@gnmarine.com.au

Gavin Dakers

Marine Cert

Survey Recognitions:

DAE – Design Approval – Electrical– Electrical Systems

Surveyor – Electrical Systems

Survey area:
New Zealand wide, Australia, South Pacific

Mobile:
+64 21 29 0313

Email:
gavin@marinecert.co.nz

Web:
www.marinecert.co.nz

Gregory Marsden

Marsden Marine Ship Surveyors

Survey Recognitions:

P4 – Periodic 4 – Glass Reinforced Plastic (GRP), Fibre Reinforced Plastic (FRP) and Alloy

Survey area:
New Zealand wide - Wellington based

Mobile:
+64 21 420984

Email:
office@mmservices.co.nz

Web:
www.smallshipssurveys.co.nz

Harrie Ron Alma

Survey Recognitions:

DAE – Design approval - Electrical - Specialist design approval for ships electrical systems

Surveyor – Electrical Systems - Inspection and testing of electrical systems on board ships

Survey area:
Bay of Plenty

Mobile:
+64 27 456 9683

Email:
harroalma@gmail.com

Hong He

Shi.E.L.D Services (New Zealand) Limited

Survey Recognitions:

P2 – Periodic 2 – Steel

IC2 – Initial Construction 2 – Steel

Survey area:
New Zealand and International

Mobile:
+64 21 581 816

Email:
hehong.marine@outlook.com

Web:
www.shieldservices.it

Ian Anthon

Marine Consulting and Survey Pty Ltd

Survey Recognitions:

IC1 – Initial Construction 1 (Restricted level) - all materials only for ships up to 35 metres within Offshore Limits

P1 – Periodic 1 (Restricted level) - all materials only for ships up to 35 metres within Offshore Limits

Survey area:
Australia and New Zealand

Mobile:
+61 0 409 691 368

Email:
ian.anthon@marineconsulting.com.au

James Nolan

Maritime Survey Australia

Survey Recognitions:
IC1 – Initial Construction 1 – for ships up to 35 metres, restricted to Offshore Limits only

P1r – Periodic 1r – for ships up to 35 metres, restricted to Offshore Limits only

DASA – Design approval – Steel and Aluminium for ships up to 45 metres restricted to Offshore Limits

DAF – Design approval - Fibre Reinforced Plastic (FRP) for ships up to 45 metres restricted to Offshore Limits

DAP – Design approval – Plastic for ships up to 45 metres restricted to Offshore Limits

Survey area:
Australia, New Zealand

Tel:
+64 211 499 857 (Ben Felton)

Mobile:
+61 400 828 831

Email:
james@maritimesurveyaustralia.com.au

Web:
www.maritimesurveyaustralia.com.au

Johannes (Hans) Grimbergen

SGS New Zealand Limited

Survey Recognitions:

IC2 – Initial and construction 2 – Aluminium

IC2 - Initial and construction 2 – Steel: Major Alteration / Repair only

IC2 - Initial and construction 2 – Glass Reinforced Plastic (GRP): Initial Survey only

P1r – Periodic 1r – Steel and Aluminium

P2 – Periodic 2 – Wood and GRP

Surveyor – Novel craft – Canoe

Survey area:
North Island

Tel:
+64 7 547 4564

Mobile:
+64 27 597 8529

Email:
hans.grimbergen@sgs.com

Web:
wwww.sgs.co.nz

Jorge Cussianovich

Lloyd’s Register International

Survey Recognitions:

P1 – Periodic 1 – Periodic Surveys: Steel and Aluminium

Surveyor – MARLPOL/IOPP

Surveyor – Electrical Systems

Survey area:
North Island, South Island

Tel:
+64 9 914 2806

Mobile:
+64 21 173 2247

Email:
jorge.cussianovich@lr.org

Web:
www.lr.org

Kazimierz (Kaz) Leon Aremka

Dunsford Marine Limited

Survey Recognitions:

IC1 – Initial and Construction 1 – Steel and Aluminium

P1 – Periodic 1 – Steel and Aluminium

Maritime Labour Convention (MLC)

Survey area:
New Zealand & international

Tel:
+64 9 307 9122

Mobile:
+64 21 483 725

Email:
kaz@dunsfordmarine.co.nz

Web:
www.dunsfordmarine.com

Ken Wyatt

Able Ships Limited

Survey Recognitions:

P1 – Periodic 1 – Steel and Aluminium

Maritime Labour Convention (MLC)

Survey area:
Lower North Island

Mobile:
+64 21 0279 1253

Email:
ken@ableships.co.nz

Web:
www.ableships.co.nz

Leonardus (Leon) Klijmeij

Maritime and Industry Services Ltd

Survey Recognitions:

P1r – Periodic 1r – Steel and Aluminium

P2 – Periodic 2 - FRP(GRP and Carbon Fibre)

IC2 – Initial Construction 2 – Steel and Aluminium, Initial 2 only (not construction) – FRP (GRP and Carbon Fibre)

Survey area:
New Zealand

Mobile:
+64 27 417 1773

Email:
leon@misl.co.nz

Matk Smith

SET Marine

Survey Recognitions:

DAE – Design Approval –Electrical Systems

IC1SA Initial and Construction 1 - Steel and Aluminium ships up to 35 metres (restricted to Offshore Limits only) - subject to following conditions:
- Not permitted to undertake any Loadline surveys (MR Part 47)
- Passenger boats (less than 24m in length) - Non-Passenger boats (less than 24 meters in length), that are not surveyed to carry any cargo.

P1rSA Periodic 1 - Steel and Aluminium ships up to 35 metres (restricted to Offshore Limits only).

Surveyor – Electrical Systems

Surveyor – Radio equipment

Survey area:
New Zealand and Australia

Mobile:
+61 (0) 403585448

Phone:
+61 (7) 3067 3438

Email:
mark.smith@setqld.com.au

Marty Black

Survey Recognitions:

Surveyor – under Maritime Rule Part 40G for Jet Sprint Vessels and Personal Water Craft only

Survey area:
New Zealand wide

Tel:
+64 3 442 3445

Mobile:
+64 27 434 5289

Email:
harbourmasterqt@smsl.co.nz

Martin Moore

Sea Cargo Services

Survey Recognitions:

Surveyor – Carriage of Livestock

Survey area:
New Zealand wide

Mobile:
+64 24 954 192

Email:
martin@whiterose.co.nz

Mike Ebsworth

Maritime Projects

Survey Recognitions:

IC1 – Initial and Construction 1 (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

P1r – Periodic 1r (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

Surveyor- Electrical (Restricted level) – only up to 50V (AC); and 120V (DC)

Survey area:
Australia / New Zealand

Tel:
+61 7 5445 4226

Mobile:
+61 0 400 333 223

Email:
mike@maritimeprojects.com.au

Web:
www.maritimeprojects.com.au

Michael Hunn

Kedge Pty Ltd

Survey Recognitions:

IC1 – Initial Construction 1 – for ships up to 35 metres, restricted to Offshore Limits only

P1r – Periodic 1r – for ships up to 35 metres, restricted to Offshore Limits only

DASA – Design approval – Steel and Aluminium for ships up to 45 restricted to Offshore Limits

DAF – Design approval - Fibre Reinforced Plastic (FRP) for ships up to 45 metres restricted to Offshore Limits

DAP - Design approval – Plastic for ships up to 45 metres restricted to Offshore Limits

DAW - Design approval – Wood for ships up to 45 metres restricted to Offshore Limits

DALC - Design approval – Light Craft for ships up to 45 metres restricted to Offshore Limits

DAN - Design approval – Novel Craft for ships up to 45 metres restricted to Offshore Limits

Survey area:
Australia / New Zealand / International

Tel:
+61 3 6292 5782

Mobile:
+61 438 753 330

Email:
mikehunn@kedge.com.au

Web:
www.kedge.com.au

Mike Tweedie

Survey Recognitions:

IC1 – Initial and Construction 1 (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

P1r – Periodic 1r (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

Surveyor – Electrical (Restricted level) – only up to 50V (AC); and 120V (DC)

DASA – Design approval (Restricted level) – Steel and Aluminium only for ships up to 35 metres within Offshore Limits

DAF – Design approval (Restricted level) – Fibre Reinforced Plastic (FRP) only for ships up to 35 metres within Offshore Limits

DAP - Design approval (Restricted level) – Plastic – only for ships up to 35 metres within Offshore Limits

Survey area:
Australia

Tel:
+61 8 8633 2727

Mobile:
+61 4 3710 3239

Email:
mike@tweedmarine.com

Web:
www.tweedmarine.com

Neil Durand

DNVGL New Zealand Limited

Survey Recognitions:

P1 – Periodic 1 – Steel and Aluminium

IC1 – Initial Construction – Steel and Aluminium

Surveyor – MARPOL/IOPP

Survey area:
New Zealand, Pacific Islands

Tel:
+64 9 414 5572

Mobile:
+64 21 929 885

Email:
neil.durand@dnvgl.com

Web:
www.dnvgl.com

Nicholas Martin

Survey Recognitions:

IC1 – Initial and Construction 1 (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

Surveyor – Electrical (Restricted level) – only up to 50V (AC); and 120V (DC)

DAsa - design approval - Steel and Aluminum for ships up to 45 meteres, restricted to offshore limits only

DAf - Design approval - Fibre Reinforced Plastic (FRP) for ships up to 45 meters restricted to offshore limits only.

Dap - design approval - plastic for ships up to 45 metres restricted to offshore limits only

Daw - design approval - plastic for ships up to 45 metres restricted to offshore limits only

DAlc - design approval - plastic for ships up to 45 metres restricted to offshore limits only

Dan - design approval - plastic for ships up to 45 metres restricted to offshore limits only

Survey area:
Australia and New Zealand

Tel:
+61 0408 916 478

Email:
nick@dcvs.com.au

Web:
www.dcvs.com.au

Nigel Hay-Smith

Able Ships Limited

Survey Recognitions:

IC2SA – Initial and Construction 2 - Steel and Aluminium ships up to 24 metres restricted to Offshore Limits only - subject to following conditions: - Not permitted to undertake any Loadline surveys (MR Part 47)

IC2F - Initial and Construction 2 - Fibre Reinforced Plastic ships up to 24 metres restricted to Offshore Limits only - subject to following conditions: - Not permitted to undertake any Loadline surveys (MR Part 47)

DASA - Design Approval - Steel and Aluminium ships up to 24 metres restricted to Offshore Limits only - subject to following conditions: - Not permitted to undertake calculations of assignment for load line surveys

DAF - Design Approval - Fibre Reinforced Plastic ships up to 24 metres restricted to Offshore Limits only - subject to following conditions: - Not permitted to undertake calculations of assignment for load line surveys

Survey area:
Australia and New Zealand

Tel:
+64 3 539 0203

Mob:
+64 27 254 3598

Email:
nigel@tasnav.co.nz

Web:
www.ableships.co.nz

Nina Heatley

Survey Recognitions:

DASA – Design approval – Steel and Aluminium

DAF – Design approval – FRP

DAw – Design approval – Timber composites only

DAP – Design approval – Plastic

DAN – Design approval – Seabreacher vessels

Surveyor – Novel craft – Seabreacher vessels

40G Marine Autonomous Surface Ships (MASS)

Survey area:

Mobile:
+64 21 410 870

Email:
nina@cleverfoxprojects.com

Web:
www.cleverfoxprojects.com

Patrick Clissold

SGS NZ Ltd

Survey Recognitions:

P1 - Periodic 1 - Steel and Aluminium

P2 – Periodic 2 – Wood and Glass Reinforced Plastic (GRP)

IC1 - Initial and Construction - Steel and Aluminium

Survey area:
Christchurch and South Island

Mobile:
+64 27 573 5705

Email:
patrick.clissold@sgs.com

Web:
www.sgs.co.nz

Paul Stock

Wainui Marine

Survey Recognitions:

IC3 – Initial and Construction 3 – Wood and Fibre Reinforced Plastic (FRP)

P3 – Periodic 3 – Wood and Fibre Reinforced Plastic (FRP)

Survey area:
Auckland and New Zealand wide

Tel:
+64 9 845 4467

Mobile:
+64 21 747 687

Email:
paul@wainuimarine.co.nz

Web:
www.wainuimarine.co.nz

Pete Clarke

SeaSpark Limited

Survey Recognitions:

IC2 – Initial and Construction 2 – Steel and Aluminium

P1r – Periodic 1r – Steel and Aluminium

Surveyor – Carriage of Livestock

Survey area:
New Zealand and International

Mobile:
+64 21 468 553

Email:
pjccoct@gmail.com

Peter Keyes

Kedge Pty Ltd

Survey Recognitions:

IC1 – Initial and Construction 1 (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

P1 – Periodic 1 (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

Survey area:
Australia, New Zealand and International

Tel:
+61 3 6292 5782

Mobile:
+61 438 338 801

Email:
peterkeyes@kedge.com.au

Web:
www.kedge.com.au

Phil (Philip) Bish

Prime Marine Surveyors

Survey Recognitions:

IC1 – Initial Construction 1 (up to 24 metres) - Steel and Aluminium,FRP (Composite - Carbon Fibre, Kevlar/Aramid) GRP and Wood

P1 – Periodic 1r (up to 24 metres) – Steel and Aluminium,FRP (Composite – Carbon Fibre, Kevlar/Aramid), GRP and Wood

IC2 – Initial Construction 2 – Steel and Aluminium,FRP (Composite and GRP), and Wood

P2 – Periodic 2 – Steel and Aluminium,FRP (Composite and GRP), and Wood

Surveyor – Novel Craft – Seabreacher vessels

Surveyor – Novel Craft – Flite board electric foil board

Surveyor – Novel Craft – Personal Water Craft (PWC), Classic power and Sailing vessels

Survey area:
New Zealand wide, offshore

Tel:
+64 9 412 7884

Mobile:
+64 27 480 5421

Email:
bishi@xtra.co.nz

Robert (Rob) Ashworth

Ashworth Maritime Services

Survey Recognitions:

P2 – Periodic 2 (with conditions) – Open Boats, Passenger Boats (less than 24 metres in length), Non-passenger boats (less than 24 metres in length) that are not surveyed to carry cargo. Not permitted to undertake any load line surveys

Survey area:
Australia – All States and South Pacific

Mobile:
+61 041 932 1225

Email:
ashworthmaritime@bigpond.com

Web:
www.ashworthmaritime.com.au

Robert Browne

Able Ships Limited

Survey Recognitions:

IC1 – Initial and Construction 1 – Steel and Aluminium

IC1 – Initial (survey only ≤ 24 metres) – Wood and GRP

IC2 – Initial and construction 2 – Wood and GRP

P1 – Periodic 1 – Steel, Aluminium, Wood and GRP

Survey area:
New Zealand - based in Nelson / Marlborough

Tel:
+64 3 543 2492

Mobile:
+64 27 347 5696

Email:
robertcontracting2@gmail.com

Web:
www.ableships.co.nz

Rory Clampett

SGS New Zealand

Survey Recognitions:

IC2 – Initial and Construction 2 – Aluminium

P3 – Periodic 3 – Wood and GRP

P1r – Periodic 1 (Restricted level) – Steel and Aluminium

Survey area:
New Zealand - based in Nelson / Marlborough

Tel:
+64 7 281 0452

Mobile:
+64 27 205 3508

Email:
rory.clampett@sgs.co.nz

Web:
www.sgs.co.nz

Robin Williams

Robin Williams & Associates

Survey Recognitions:

IC1 – Initial and Construction 1 – Steel and Aluminium, FRP (Composite and GRP), Wood & Plastic (Roto moulded and welded)

P1r – Periodic 1r – Steel and Aluminium, FRP (Composite and GRP), Wood & Plastic (Roto moulded and welded)

Surveyor – Novel craft – Amphibious craft, Waka, Classic Power and Sailing, and Reconfigurable barges

Surveyor – 40F Light Craft (Hovercraft)

Survey area:
New Zealand wide, offshore

Mobile:
+64 27 459 5564

Email:
robinwilliams@xtra.co.nz

Ruzbeh Sam Nariman

Survey Recognitions:

IC1 – Initial and Construction 1 – Steel, Aluminium, Composite and GRP

P1 – Periodic 1 – Steel, Aluminium, Composite and GRP

Surveyor – MARPOL/IOPP, High Speed Craft, Electrical Systems, Carriage of Livestock and BWM (Part 300)

Survey area:
New Zealand wide

Mobile:
+64 221 894 782

Email:
ruzbeh.nariman@gmail.com

Sajeer V Kandathil

National Marine Design and Survey

Survey Recognitions:

DASA – Design approval – Steel and Aluminium (including Alloys) for ships up to 45 metres within Offshore Limits

DAF – Design approval - Fibre Reinforced Plastic (FRP) for ships up to 45 metres within Offshore Limits

DAP – Design approval – Plastic – only for ships up to 45 metres within Offshore Limits

DAW – Design approval (Restricted level) – Wood – for ships up to 45 metres within Offshore Limits

DALC – Design approval – Light Craft – for ships up to 45 metres within Offshore Limits

DAN – Design approval – Novel Craft – for ships up to 45 metres within Offshore Limits

DAFC – Ferro Cement

DAE – Design approval - Electrical – Limited only up to 50V (AC) and 120V (DC)

IC1 - Initial and Construction 1 (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

P1r - Periodic 1 (Restricted level) – all materials only for ships up to 35 metres within Offshore Limits

Survey area:
Australia, New Zealand and worldwide

Phone:
+61 478 587 144 (Australia)

Email:
nmdsurveyor@gmail.com

Sjaak Rutte

Dredging & Offshore Support Ltd

Survey Recognitions:

IC1 – Initial Construction 1 – Steel, Aluminium

P3 – Periodic 3 – GRP

P1r - Periodic 1r - Steel, Aluminium

Surveyor – MARPOL Annex VI (Part 199), ships less than 400GT and engaged in international or domestic voyage

Survey area:
New Zealand wide

Mobile:
+64 27 261 3730

Email:
jjmrutte@gmail.com

Stan (Stanley) Collett

Survey Recognitions:

P3 – Periodic 3 – Wood and Fibre Reinforced Plastic (FRP)

Survey area:
New Zealand and Asia

Mobile:
+64 21 873 703

Email:
portrush@xtra.co.nz

Web:
www.portrush.co.nz

Steve Bates

Able Ships Ltd

MDSCi Ltd

Survey Recognitions:

P2 – Steel and Aluminium

Survey area:
Auckland, Northland, and throughout New Zealand

Tel:
+64 9 478 8614

Mobile:
+64 21 0346637

Email:
steveb.mdsci@gmail.com

Web:
www.ableships.co.nz

Steve Mabbett

Steve Mabbett (2014) Limited

Survey Recognitions:

IC1 – Initial and Construction 1 – Steel and Aluminium, GRP and Wood

P1 – Periodic 1 – Steel and Aluminium, GRP and Wood

Surveyor – Novel craft – Personal Water Craft (PWC)

Survey area:
Northland, Auckland, Tauranga, New Zealand Wide and International

Tel:
+ 64 9 438 8713

Mobile:
+64 21 740 341

Email:
steve@stevemabbett.co.nz

Web:
www.stevemabbett.co.nz

Steven John Larkin

Russ Larkin & Associates Pty Limited

Survey Recognitions:

IC1 – In Construction and Initial 1 - all materials only for ships up to 35 metres within the Offshore Limits

P1r – Periodic 1 (reswtricted) all materials only for ships up to 35 metres within the Offshore Limits, Surveyor - radio equirpment

Survey area:
Australia Wide and International

Tel:
+ 61 412 263 279

Email:
steve@russlarkinassociates.com.au

Web:
www.russlarkinassociates.com.au

Tony Murray

Tony Murray Inspections Limited

Survey Recognitions:

DAE – Design Approval - Electrical – Specialist design approval for ships electrical systems

Surveyor - Electrical Systems - Inspection and testing of electrical systems on board ships

Survey area:
New Zealand

Mobile:
+64 21 930 344

Email:
info@tonymurrayinspections.co.nz

Web:
www.tonymurrayinspections.co.nz

If you are a recognised surveyor and would like to be added to this list or have your details amended, please contact surveyors@maritimenz.govt.nz

Survey recognition categories

For an outline of surveyor and other recognition categories, and the qualifications and experience expected for each, please refer to the Surveyor recognition framework guidelines below.

Surveyor recognition framework guideline[PDF: 323kB, 20 pages]